Industrial Automation & Robotics Suite

High-Precision Robotic Welding, Proving & Lifecycle Automation

From metallurgical weld trials and offline 3D path simulation to guaranteed AMC uptime and multi-axis WAAM additive manufacturing. Engineered in Coimbatore for high-throughput fabrication shops and global OEMs.

500+
Weld Trials Completed
0.05mm
Repeatability Proved
< 24h
Emergency SLA Response
100%
Pre-Capital Validation
Engineering Architecture Coimbatore Technology Center

End-to-End Robotics & Welding Automation Capabilities

Kavin Inc supports manufacturing leaders across automotive, aerospace, heavy fabrication, machine building, and academic institutions with full-lifecycle automation support. Rather than supplying generic machinery, we execute empirical feasibility trials, metallurgical parameter stabilization, offline 3D path simulation, custom fixture engineering, and enterprise lifecycle AMC to guarantee zero-defect production uptime.

Feasibility & Metallurgical Weld Proving

De-risk automation capital investments by validating weld penetration, cycle takt, and joint aesthetics on your physical parts before procurement.

  • Macro-etch cross-section & penetration depth verification
  • WPS / PQR parameter envelope qualification
  • Spatter-free digital waveform optimization (Fronius / Kemppi / SKS)

Turnkey Cell Integration & Offline 3D Simulation

Eliminate line clashes and shave cycle times with virtual reachability analysis, offline robot kinematics, and custom pneumatic fixturing.

  • ABB RobotStudio & FANUC RoboGuide 3D digital twins
  • Ergonomic clamping, torch approach & positioner synchronization
  • Seam-tracking, multi-pass logic & optical safety interlocking

Enterprise Lifecycle AMC & Rapid Field Support

Safeguard automated production lines against catastrophic downtime with scheduled multi-point health audits and rapid SLA response teams.

  • Scheduled mechanical gearbox & electrical diagnostics
  • Harmonic drive backlash zeroing & 6-axis mastering calibration
  • Priority emergency breakdown dispatch across South India

WAAM 3D Additive & Specialized Cladding

Pioneer advanced metallic manufacturing with large-envelope Wire Arc Additive Manufacturing and severe-environment hardfacing.

  • Near-net shape metal deposition up to 6+ kg/hour
  • Anti-corrosive / anti-wear overlay (Inconel 625, Stellite, Carbides)
  • Bimetallic dual-metal structures combining tough core + hard skin

Frequently Asked Questions

Yes. We engineer complete turnkey robotic welding cells from scratch, and also support existing installed cells with cycle-time reduction, path re-programming, welding parameter troubleshooting, refurbishing, and comprehensive annual maintenance (AMC).
No. Simply share your component drawings (2D/3D CAD), material specification, and production takt requirements. Our engineers evaluate reach, payload, joint geometry, and cycle time to recommend the optimal robot, positioner, and welding power source.
Absolutely. Our Weld Proving and Robot Demonstration service allows you to send sample components to our Coimbatore robotics facility. We perform trial welds, establish the WPS parameter window, analyze macro-etched penetration, and provide a full metallurgical feasibility report.
We specialize in ABB, FANUC, KUKA, and CRP industrial robots and cobots. Our engineers are certified in controller architectures including ABB IRC5 / OmniCore, FANUC R-30iB / R-30iB Plus, and modern digital welding interfaces (Fronius, Kemppi, SKS, Megmeet).
Lifecycle Engineering SLA: 24/7 Priority Field Support

Industrial Robot Services & Field Support

Comprehensive on-site robotic system maintenance, preventive diagnostic audits, mechanical backlash checks, safety fencing interlocks, and rapid breakdown troubleshooting for ABB, FANUC, KUKA, and CRP robots.

Engineering Deliverables & Scope

  • 28-Point Health Audit: Full mechanical, electrical, controller, and safety check
  • Image Backups: Controller disk backup, system parameters & program versioning
  • Axis Calibration: Backlash assessment, resolver zeroing & mastering verification
  • Torch & Cable Dressing: Internal/external dress pack routing & wear inspection

Required Client Inputs

  • Robot make, arm model, and controller serial number
  • Description of fault codes, error alarms, or performance symptoms
  • Plant location and scheduled maintenance downtime window
  • Existing controller backups (if available for comparison)
Pre-Capex Validation Turnaround: 48 - 72 Hours

Weld Proving & Metallurgical Process Trials

Validate weld quality, joint penetration, and cycle takt on your actual production components before committing to capital automation. Eliminate technical risk through empirical laboratory testing in Coimbatore.

Engineering Deliverables & Scope

  • Qualified WPS Window: Voltage, current, wire feed, and travel speed envelope
  • Metallurgical Report: Macro-etch cross section with penetration depth verification
  • Cycle Takt Analysis: Accurate arc-on time and total component cycle study
  • Tooling Guidance: Custom fixture orientation, torch angle & clearance blueprint

Required Client Inputs

  • Component drawings (2D/3D CAD) showing joint types and tolerances
  • Parent material grade, sheet/plate thicknesses, and surface finish
  • Quality acceptance criteria (ISO 5817 Level B/C, AWS D1.1, NDT)
  • Minimum 3 - 5 sets of physical sample components for proving trials
Uptime Assurance Contract: Quarterly / Monthly SLAs

Enterprise Robot AMC & Preventative Maintenance

Structured Annual Maintenance Contracts engineered to maximize MTBF (Mean Time Between Failures) and minimize MTTR (Mean Time to Recovery) with scheduled multi-point audits and emergency breakdown SLA dispatch.

Engineering Deliverables & Scope

  • Preventive Audits: Scheduled monthly or quarterly mechanical/electrical audits
  • Lubrication Overhaul: Gearbox oil/grease replenishment and seal integrity tests
  • Battery & Memory: SMB memory battery renewal and complete hard-disk cloning
  • Guaranteed SLA: 4 to 24-hour on-site priority response during breakdown calls

Required Client Inputs

  • Total robot population count, installed makes/models, and serial numbers
  • Operating shift pattern (single, double, or continuous 24/7 manufacturing)
  • Historical breakdown logs and known high-wear mechanical items
  • Plant location and facility access protocols
Cycle Optimization RobotStudio • RoboGuide

Robot Offline Simulation & Seam Programming

Expert robot programming from scratch, offline 3D path generation, torch weave tuning, touch-sense seam tracking, and multi-pass logic to shave critical seconds off every cycle while ensuring zero collisions.

Engineering Deliverables & Scope

  • 3D Digital Twin: Collision-free simulation and torch reachability verification
  • Native Robot Code: Clean, structured RAPID (ABB) or KAREL / TP (FANUC) code
  • Multi-Axis Synchronization: Coordinated motion with 1-axis / 2-axis positioners
  • PLC Handshakes: I/O signal mapping, interlocks, and error handling routines

Required Client Inputs

  • Part CAD 3D model (.STEP / .IGES) and fixture clamp layout
  • Weld sequence, required fillet/butt throat size, and travel speed goals
  • Existing controller backup (if modifying an installed production cell)
  • Preferred PLC communication protocol (Profinet, Ethernet/IP, DeviceNet)
Empirical Demonstration At Coimbatore Lab or On-Site

Live Robotic Welding Demonstration

Experience robotic welding in action on representative test joints. Observe high-deposition MIG/MAG/TIG performance, positioner synchronization, and spatter-free weld pool control on your sample parts.

Engineering Deliverables & Scope

  • Live Arc Demonstration: Real-time automated welding on test coupons
  • Quality Inspection: Immediate visual bead inspection and joint penetration check
  • Cycle Estimation: Accurate baseline cycle time study for production planning
  • Expert Consultation: Direct technical discussion with senior robotics engineers

Required Client Inputs

  • Component dimensions, joint geometry (butt, fillet, lap, corner)
  • Test coupons or raw sample parts (minimum 2 - 3 sets recommended)
  • Target daily or monthly production volume
  • Expected timeline for automation cell commissioning
Process Metallurgy Zero-Defect Optimization

Welding Process Troubleshooting & Consultancy

Deep-dive root-cause engineering to eradicate recurring weld defects including porosity, blowholes, spatter, lack of fusion, burn-through, and component distortion in automated fabrication lines.

Engineering Deliverables & Scope

  • Root Cause Analysis (RCA): Diagnostic audit report with metallurgical findings
  • Waveform Tuning: Pulse parameter fine-tuning for spatter-free arc stability
  • Gas & Wire Selection: Shielding gas mixture, flow rate, and wire alloy optimization
  • Distortion Control: Heat input mitigation, clamping strategy & back-step sequencing

Required Client Inputs

  • High-resolution photographs / macro-sections of defective welds
  • Current welding parameter table (V, A, WFS, travel speed, shielding gas)
  • Base material test certificates (MTC) and surface cleaning procedure
  • Frequency, defect rejection rate, and batch history
Flexible Capacity Zero-CAPEX Rapid Deployment

Short-Term & Project Welding Robot Rental

Rapid-deployment robotic welding cells on monthly or project lease. Ideal for handling sudden contract surges, seasonal volume spikes, or pilot production runs without heavy capital expenditure.

Engineering Deliverables & Scope

  • Turnkey Robot Cell: 6-axis robot, digital power source, wire feeder, controller
  • Fast Commissioning: On-site positioning, leveling, and safety fencing setup
  • Quick-Start Teaching: Weld trajectory programming tailored to your component
  • Operator Training: Hands-on operator training and ongoing technical assistance

Required Client Inputs

  • Expected rental duration (months) and daily shift hours (single/double shift)
  • Component specifications and welding process type (MIG/MAG/TIG)
  • Factory floor footprint allocation and 415V 3-phase power readiness
  • Compressed air (6 bar) and shielding gas supply availability
Asset Life Extension Factory-Tolerance Restoration

Precision Robot Overhaul & Refurbishment

Restore aging or degraded industrial robots to factory-original repeatability and speed. Complete mechanical overhaul, harmonic gearbox rebuild, wiring harness renewal, and repainting.

Engineering Deliverables & Scope

  • Teardown & Inspection: Ultrasonic cleaning, bearing inspection, and backlash audit
  • Harness Renewal: Replacement of internal high-flex wiring and SMB cables
  • Gearbox Rebuild: Synthetic lubricant renewal, seal replacement & pressure testing
  • Laser Calibration: Repeatability test to ensure <0.05 mm factory tolerance

Required Client Inputs

  • Robot make, serial number, and total operating runtime hours logged
  • Known backlash issues, axis vibration, abnormal noise, or oil leaks
  • History of past repairs or controller error alarms
  • Planned plant shutdown window for overhaul turnaround
Severe-Duty Metallurgy Inconel 625 • Stellite 6 • Hastelloy

Robotic Protective Hardfacing & Cladding

Automated deposition of high-alloy protective overlays onto carbon and alloy steel substrate components. Engineered to withstand extreme abrasion, high-temperature erosion, and aggressive corrosion in severe industrial applications.

Engineering Deliverables & Scope

  • Low Dilution Overlay: Controlled arc energy maintaining <10% parent dilution
  • Defect-Free Fusion: Non-destructive testing (UT / DPT) ensuring zero porosity
  • Thermal Management: Pre-heat & interpass logging to prevent micro-cracking
  • Certified Hardness: Verification of deposit hardness (up to 60+ HRC)

Required Client Inputs

  • Substrate base metal grade and component drawing with overlay zones
  • Target cladding alloy (Inconel, Stellite, Carbide) and required thickness (mm)
  • Service operating environment (operating temp, chemical media, abrasive type)
  • Post-cladding machining or grinding allowance requirements
3D Metal Additive Deposition: Up to 6-8 kg/hr

Wire Arc Additive Manufacturing (WAAM)

Large-scale 3D metal printing using robotic multi-axis wire arc deposition. Manufacture near-net shape blanks, custom tooling, and massive structural components with up to 80% reduction in raw material waste and lead time.

Engineering Deliverables & Scope

  • 3D CAD Slicing: Optimized layered toolpath strategy and cooling dwell cycles
  • High-Rate Deposition: Rapid structural build-up (4 to 8 kg/hr deposition rate)
  • Dense Metallurgy: Pore-free, fully dense metallic structure with fine grain
  • Post-Build Plan: Stress-relief heat treatment and CNC finish-machining allowance

Required Client Inputs

  • 3D CAD model (.STEP / .STL file) of target component geometry
  • Desired wire alloy (Mild Steel, 316L Stainless, Aluminum, Titanium)
  • Batch quantity (single prototype trial or recurring batch build)
  • Critical dimensional tolerances and post-machining surface requirements
Bimetallic Engineering Functionally Graded Materials

Dual-Metal & Multi-Material Additive Welding

Multi-wire robotic deposition fusing two distinct metallurgical alloys into a single monolithic component. Engineer hard wear-resistant working surfaces over a tough, shock-absorbing economical structural core.

Engineering Deliverables & Scope

  • Engineered Transition Zone: Controlled boundary layer avoiding brittle phases
  • Cost Optimization: Massive savings versus solid exotic alloy billet machining
  • Bond Integrity Verification: Shear strength test and ultrasonic boundary scan
  • Tailored Material Pairing: Tough ductile base paired with hard wear skin

Required Client Inputs

  • Structural core base metal vs. surface cladding alloy specifications
  • Operating mechanical stress, impact loads, and thermal cycling range
  • Component geometry showing high-wear contact surfaces
  • Target component lifecycle enhancement goals
Academia & Research Industry 4.0 Center of Excellence

Experiential Learning Robotics Lab for Academia

Turnkey industrial robotic training cells designed specifically for engineering colleges, polytechnics, and skill universities. Equip students with real-world robot programming, welding, machine vision, and PLC skills.

Engineering Deliverables & Scope

  • Industrial Workstation: 6-axis robot, safety enclosure, and digital weld power source
  • Multi-Application Modules: Welding, sorting, vision inspection, and dispensing
  • Curriculum Alignment: Lab manuals, project coursework, and syllabus mapping
  • Faculty Enablement: Certified Faculty Development Programs (FDP) & student workshops

Required Institutional Inputs

  • Designated campus laboratory floor space (sq. ft.) and 415V power access
  • Academic departments involved (Mechanical, Mechatronics, Robotics, EEE)
  • Expected student cohort size per semester and academic year
  • Preferred institutional model (CAPEX grant purchase or phased deployment)

Interactive training

Robot Programmer Challenge

Practice movement and welding programs, solve questions, and see your RAPID code and animated tool path. Save your answers and scores in a private student session.

Learn robot programming basics → Start the interactive session →