Composites Manufacturing

Automated Fiber Placement (AFP) Robot Systems

Precise, repeatable composite layup with an industrial robot. Kavin Inc designs, integrates and commissions complete AFP cells for manufacturers and research labs in India and Southeast Asia.

From CAD to composite

  1. Program the ply and fiber path
  2. Feed and heat the material
  3. Place and compact each tow
  4. Cut, restart and record the process
Process overview: a 6-axis industrial robot, an AFP head and application-specific tooling work together in one cell.

Explore the AFP cell concept

AI-generated illustrations and a conceptual layout explain the process. These are not installation photographs, selected equipment models or evidence of a delivered system.

Automated fiber placement robot ? AI-generated concept illustration of a guarded AFP cell. ? Kavin Inc

Robotic AFP cell

AI-generated concept illustration of a guarded AFP cell.

Automated fiber placement robot ? AI-generated concept illustration of tow guidance and roller compaction. ? Kavin Inc

Placement-head detail

AI-generated concept illustration of tow guidance and roller compaction.

Automated fiber placement robot ? AI-generated concept illustration of a curved composite panel. ? Kavin Inc

Composite part concept

AI-generated concept illustration of a curved composite panel.

Automated fiber placement robot ? Conceptual engineering diagram; not to scale. ? Kavin Inc

Cell-layout concept

Conceptual engineering diagram; not to scale.

What is Automated Fiber Placement?

Automated Fiber Placement (AFP) is a process that lays narrow strips of pre-impregnated fiber, called tows, onto a mould or tool, one course at a time. A robot moves the AFP head along a programmed path while the head feeds, heats, compacts and cuts each tow.

Because every tow is placed by the machine, fiber angle, overlap and gaps stay consistent from part to part. This gives stronger, lighter composite parts with less material waste than hand layup.

AFP works with carbon fiber, glass fiber and thermoplastic or thermoset tapes, and handles flat panels, curved skins and complex contoured parts.

How our AFP robot cell works

Our AFP cell combines a 6-axis industrial robot, an AFP end effector and tooling into one turnkey system.

01. Path programming

The ply layup from your CAD model is converted into robot paths using offline programming software.

02. Material feed

Fiber tows or tapes are fed from creels into the AFP head under controlled tension.

03. Heating

The tow is heated just before placement for good tack and bonding. The heating method is to be confirmed.

04. Placement and compaction

A compaction roller presses each tow onto the tool as the robot follows the path.

05. Cut and restart

The head cuts tows at the end of each course and restarts precisely at the next.

06. Monitoring

Process data such as temperature, speed and compaction force is logged for every part.

What we supply: robot and controller, AFP head, mould or mandrel tooling, rotary positioner or linear track where needed, safety guarding, programming, commissioning and operator training.

Industries and applications

IndustryTypical AFP parts
Aerospace and UAVWing skins, fuselage panels, spars, drone frames
DefenceRadomes, structural panels, protective components
Automotive and EVLightweight body panels, battery enclosures, structural reinforcements
Wind energySpar caps, blade root sections
Pressure vessels and pipesTanks, cylinders, tubes (with rotary mandrel)
Sports and consumer goodsHelmets, frames, high-performance equipment
Research and educationComposite process research, material trials, student training

Benefits of robotic AFP

  • Repeatable quality – Same fiber angle, gap and overlap on every part.
  • Less material waste – Tows are placed only where needed, cutting scrap compared with hand layup.
  • Complex shapes – A 6-axis robot follows curved and contoured surfaces that are hard to lay by hand.
  • Lower cost than gantry AFP – An industrial robot gives a smaller footprint and lower investment than dedicated gantry machines.
  • Traceability – Process data recorded for every part supports quality audits.
  • Less manual labour – Frees skilled staff from slow, repetitive layup work.

Technical specifications

Configuration guide: robot and AFP head models are not selected. Model-specific performance will be confirmed in the engineering proposal.
ParameterValue
Robot6-axis industrial robot; application-specific model. ABB, KUKA or FANUC may be considered, subject to engineering assessment.
AFP headApplication-specific fiber / tape placement head; manufacturer and model to be selected.
Tow / tape widthSelected to suit the material and AFP head; numeric width requires the selected head datasheet.
Number of towsDefined by the selected AFP head; supplier confirmation required.
Heating methodSelected for the material and resin system during engineering.
MaterialsCarbon / glass fiber; final resin and material compatibility to be agreed.
Layup speedDefined during process development and cycle-time study.
Maximum part sizeDefined by workpiece, tooling and robot work envelope.
Tooling optionsFlat table, contoured mould, rotary mandrel
ProgrammingOffline path programming from CAD

Why Kavin Inc

  • ABB Global Value Provider with in-house robot integration, programming and service in Coimbatore.
  • Turnkey delivery – one team for the robot, AFP head, tooling, safety, commissioning and training.
  • Composite experience – robot cells already built for FRP drilling and spray coating applications.
  • Support across Asia – projects in India, Sri Lanka, Vietnam and Thailand.
  • Flexible commercial terms – support for small and growing manufacturers to set up their first automation cell.

Explore our Robotic Drilling (FRP) systems, ABB Welding Robots and robotic ultrasonic spray coating project, or contact our team.

Frequently asked questions

What is the difference between AFP and ATL?

Automated Tape Laying (ATL) lays wide tape on flatter parts. AFP lays several narrow tows, so it handles curved and complex shapes better.

Why use a robot instead of a gantry AFP machine?

A 6-axis robot costs less, needs less floor space and can reach complex contours. It suits small to medium parts, prototypes and research work.

Which materials can the system process?

Carbon fibre and glass fibre tows or slit tapes, in thermoset prepreg or thermoplastic form. We match the head and heating method to your material.

Can AFP be used for research and teaching?

Yes. Universities and R&D labs use robotic AFP to study layup parameters, new materials and process monitoring.

Do you supply tooling and programming?

Yes. We supply moulds or mandrels, offline programming, commissioning and operator training as one package.

How long does delivery take?

Delivery lead time is to be confirmed. Contact our engineers to discuss your project schedule.

Planning composite automation?

Share your part drawing and material, and our engineers will suggest the right AFP cell.