Service

Book a Live Robotic Welding Demo

A live robotic welding demo on your sample component to confirm feasibility, estimate cycle time, and showcase weld appearance before full-scale automation.

Feasibility check Cycle-time estimate Weld look & stability ABB / FANUC demo ready
OK
Decision clarity Know what's possible quickly
OK
Rough cycle time Planning & ROI support
OK
Weld appearance Bead profile + spatter control
Bring sample parts + material details + acceptance criteria to get the best demo outcome.
Overview

What you get from the demo

Feasibility Confirmation

We check torch access, joint geometry, distortion risk, and whether robotic welding is suitable for your part.

Initial Parameter Guidance

We propose starting parameters (current/voltage/speed) and torch angles for stable bead profile and penetration.

Early ROI Visibility

Get a rough cycle-time estimate and understand what fixture/safety needs may be required for production.

Deliverables

What you will receive

Outputs

  • Demo trial weld (as per agreed sample count)
  • Feasibility notes + observations
  • Rough cycle time estimate (indicative)
  • Parameter starting point + torch angle guidance
  • Fixture/safety recommendations (high level)

What we need from you

  • Sample part(s) + drawing/photo
  • Material grade, thickness, joint type
  • Quality criteria (visual / NDT requirement)
  • Target output per shift / takt expectations
  • Any known welding defects (if existing)
Process

How the demo is executed (interactive steps)

Preparation

Review part, joint, and acceptance criteria. Set torch setup, wire, gas, and fixture holding to ensure stability for trials.

Trial Weld

Execute initial robotic weld path and record observations: bead profile, penetration feel, spatter, and arc stability.

Tuning

Adjust speed, angles, and basic parameters to improve bead shape and stability. Repeat trial for consistency.

Review & Recommendation

Share results, feasibility confirmation, rough cycle time estimate, and required changes for production-level setup.

FAQ

Common questions

Based on requirement. Many demos are done with sample parts at a demo setup; plant demos are possible if access and safety readiness are ensured.
Demo provides initial parameter direction and feasibility. Full WPS window and acceptance-ready documentation comes under Weld Proving service.
Yes. Share your preferred robot brand/model and welding process requirements. We will plan accordingly.
We can propose basic holding for demo. For production, we'll recommend fixture requirements based on accuracy, access, and repeatability.
Book Demo

Request a Robot Welding Demo